|
|
Greddy Switches & Cut Controllers
Our Remote Switching System (RSS) allows the
user hands-free modulation between high boost and low boost settings
on either of our PRofec boost controllers. It can also be used as a
momentary switch for nitrous, line lock, etc., when used with our
optional voltage adapter kits.
GReddy’s Multi Switching System (MSS) is a
two-channel programmable general output controller. The MSS is
cockpit-mounted and wires into a vehicle’s ECU harness and/or
optional GReddy sensors and the electronic devices you want to
control. The MSS can control up to 2 separate electronic devices
with the capability of turning on and off nitrous, solenoids,
I/C-sprayers, warning lamps and many other electronic devices. Each
channel can be programmed to activate through one, two or three
parameters such as RPM, speed, temperature, boost or any other
analog signal. With GReddy’s optional MSS Relay Kit, you can
activate fuel pumps, electric fans and other higher drawing items.
The multi color display can also monitor the inputted signals for
peak-hold and warning values.
GReddy Boost Cut Controllers (BCC) allows the
factory ECU limiters (or "fuel cut") to be eliminated
electronically, by wiring the unit directly into the factory ECU
harness. The Speed Cut Controller (SCC) eliminates
factory speed cut off for most Nissans and Toyotas. An added feature
for the SCC is it speed trigger feature that can be used to initiate
switch (similar to our RSS) via a desired speed.
(Minimum order amount $30) |
