|
|
Pauter Connecting Rods |
Pauter Performance Connecting Rods
Nissan
Pauter offers unique single rib design E- 4340 chrome-moly forged rods.
The clean, windage-reducing design and strength of these
Pauter rods has proven to be extremely popular with racers, and their
consistent high quality and excellent finish has resulted in many
satisfied customers.
4340 Billet Rod Specifications:
- E4340 vacuum melt chrome moly forging – CNC machined
- Heat-treated to Rockwell C36; full coverage shotpeened;
end-to-end balanced in sets.
- Pauter 220k psi tensile strength MSP220 steel, J-formed, rolled
thread racing rod bolts (standard.)
- Aluminum-bronze wrist pin bushings (standard.)
EDM pressure-fed
oiling to pin available for extra
(see below)
- Custom pin diameters and center-to-center rod lengths can be
ordered at no additional cost. High-performance bearings, tool steel
wrist pins and forged aluminum pistons can be ordered specifically
coordinated to your rod order (please inquire.)
- Keep in mind
that we are geared for the production of custom sizes in all engine
series.
|
|
|
ORDER:
Call us to order Pauter Rods for all Nissan's not listed below 0845 6520501 |
Nissan
Engine Series |
Pin
Dia. |
Big End
Bore |
Length |
Big End
Width |
Weight |
Part # |
Price/
Set |
Buy
Now |
| 510 L16 |
.827" |
2.087" |
5.235" |
1.052" |
590g |
L16-210-530-1330F |
£465 |
|
| 240Z L24 (6 cyl) |
.827" |
2.087" |
5.235" |
1.052" |
590g |
L24-210-530-1330F |
£665 |
|
| Sentra CA18DET |
.787" |
1.890" |
5.230" |
.954" |
656g |
NIS-200-480-1330F |
£465 |
|
| Skyline GT-R RB26DETT / RB25 (6 cyl) |
.827" |
2.008" |
4.783" |
.856" |
530g |
NIS-210-510-1215F |
£665 |
|
| 240SX KA24DE |
.827" |
2.087" |
6.490" |
.975" |
695g |
NIS-210-530-1650F |
£465 |
|
| 300ZX twin turbo VG30DETT (6 cyl) |
.866" |
2.087" |
6.063" |
.817" |
625g |
NIS-220-530-1540F |
£665 |
|
| L28 280Z (6 cyl) |
21mm |
53.0mm |
130.2mm |
- |
- |
NIS-210-530-1302F |
£665 |
|
| SR20DE |
22mm |
51.0mm |
136.1mm |
- |
- |
NIS-220-510-1361F |
£465 |
|
| VQ35DE (6 cyl) |
22mm |
55.0mm |
144.0mm |
- |
- |
NIS-220-550-1440F |
£665 |
|
| A13 |
- |
- |
5.694 |
- |
- |
NIS-200-480-1370F |
£465 |
|
| CA20 |
- |
- |
5.866 |
- |
- |
NIS-200-480-1490F |
£465 |
|
| GA16DE |
- |
- |
5.532 |
- |
- |
NIS-190-430-1405F |
£465 |
|
| QR25DE |
20mm |
48mm |
143mm |
- |
- |
NIS-200-480-1430F |
£465 |
|
| U20 |
- |
- |
5.690 |
- |
- |
NIS-220-550-1445F |
£465 |
|
| VQ30DET |
- |
- |
5.808 |
- |
- |
NIS-220-480-1475F |
£665 |
|
| All other
Models |
various |
custom rods |
various |
Call us to order
0845 6520501 |
| EDM pressure-fed
oiling to pin |
Fits |
Part # |
Price/
Set |
Buy
Now |
| EDM pressure-fed
oiling to pin |
- |
PAUTER-EDM-04 |
£149 (x4) |
|
| EDM pressure-fed
oiling to pin |
- |
PAUTER-EDM-05 |
£179 (x5) |
|
| EDM pressure-fed
oiling to pin |
- |
PAUTER-EDM-06 |
£215 (x6) |
|
| EDM pressure-fed
oiling to pin |
- |
PAUTER-EDM-08 |
£299 (x8) |
|
|
Notes for ALL Rods:
- Weights are representative of production Pauter rods made to the dimensions listed. Actual weights may vary slightly.
- Rods with non-stock
center-to-center lengths can vary considerably from these figures.
- Big end bore/width and Pin dia/width figures listed above are the dimensions we use to produce optimum running tolerances for that specific
engine. Center-to-center lengths above are usually factory stock figures, or for a particularly popular aftermarket style that we normally keep
in stock.
- Unless otherwise specified, your rods will be sized for
full-floating wrist pins.
- Unless otherwise specified, your rods will have factory offset.
|
|
